background image

1

iBT33

IMPORTANT INFORMATION ABOUT WATERPROOF OPERATION

 

For proper waterproof operation, make sure the waterproof cover on back of the unit is completely 

flush with the unit by pressing along the entire edge of the cover until it is completely and securely in 
place

 

•  The unit is IP67 waterproof rated, meaning it is immersible for up to 30 minutes at a depth of 1 meter 

(3 feet). It will typically withstand rain, snow and being submersed in shallow water. Longer duration or 

deeper immersion that exceeds the tested limits may cause product failure and void the warranty.

•  DO NOT immerse the unit in water for extended periods. 
•  DO NOT immerse the unit in water deeper than 1 meter (about 3 feet).
•  Make sure cover and surrounding surfaces are completely dry before opening cover to prevent moisture 

from damaging the internal electronics.

•  Keep rubber cover free of dirt, sand, or other objects that can interfere with proper sealing. If for any 

reason the waterproof cover is not making a tight waterproof seal water may enter the unit.

•  Rinse with tap water after immersion in salt water or swimming pool.
•  DO NOT clean unit with oily soaps or use chemicals or solvents. Clean with damp cloth.

water

tight

not

water

tight

Содержание iBT33v3
















Отзывы: