5. When pairing is successful, a voice prompt will announce “CONNECTED”, the Bluetooth icon will
appear solid, cabinet lights will flash blue two times, indicating the iBT297v2 is ready to play music.
There should also be an indication on your device. If no device is successfully paired within 3 minutes
the iBT297v2 will default to previous mode. Once the iBT297v2 is paired to a device, when powered
on and in Bluetooth mode, it will attempt to autolink when the device is within range (about 33 feet).
To reset Bluetooth,
press and hold
the
Bluetooth Pairing Button
for 10 seconds.
11
P12
Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT297v2. Once
your device is paired, the iBT297v2 can recognize it and you can play your audio through it.
1. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (check
in Options or Settings).
2. Press and release the
Mode Button
as needed until the “BT” indicator icon
appears on the display.
3.
Press and hold
the
Bluetooth Pairing Button
located on the back of the unit
for 2 seconds. The iBT297v2 cabinet will flash blue and red, a voice prompt
will announce “PAIRING” and the Bluetooth icon and “PAIR” will flash on
the display, indicating the iBT297v2 is in pairing mode.
4. “iHome iBT297v2” should appear in your device’s Bluetooth menu. Select
“iHome iBT297v2” to connect it. If prompted for a passcode, enter “1234” on
your device.
Pairing Your Bluetooth Device
2s
MODE
iHome
iBT297v2