8
P9
Setting and Using the Alarms (Continued)
1. Press and hold the
Alarm Button
for 2 seconds until the alarm time display and alarm icon flash. A
beep sounds.
2. Press the or
Buttons
to adjust the alarm time to the desired time (hold for rapid setting).
Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the left of
the display.
3. Press the
Alarm Button
to confirm the alarm time setting. The
wake-to
source will flash.
4. Press the or
Buttons
to select the desired wake to alarm source: Bluetooth, radio or buzzer.
Wake to Bluetooth
: You will wake to the currently linked Bluetooth device. If no device is
detected, the alarm will default to buzzer.
Wake to Radio
: Press the
Alarm Button
to confirm. Press the
Presets Button
to select an FM preset
to wake to, or press the
or
Buttons
to tune in a desired wake to station.
(To set Presets, see Setting and Using FM Presets on page 10.)
Wake to Buzzer
: You will wake to buzzer.
5. Press the
Alarm Button
to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm
alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.
6. To turn off a sounding alarm and reset it to come on the next day at the same time, press the
Power/Alarm Reset Button
or the associated alarm button ( or ) to reset alarm.
Previewing the Alarm and Turning the Alarm On/Off
Press and release the desired
Alarm Button
as needed to toggle the alarm ON (indicated by the alarm icon)
or OFF (no alarm icon).
Using the
iBT230