DC 12V, 1.5A
DC 12V, 1.5A
DC 12V, 1.5A
DC 12V, 1.5A
FRONT
INTERIOR
CONNECTING TO YOUR AMAZON ECHO DOT
Docking Your Amazon Echo Dot
Bedside Speaker System
Model: iAV2
for Amazon Echo Dot
QUICK START GUIDE
»
iAV2
»
USB cable
»
Universal voltage adapter
7
6
9
10
10
»
Connect the included USB cable to the Dot USB Charge Port , then connect the
other end of the cable to the Echo Dot USB port.
»
Connect the AC power adapter to the DC jack .
»
Align the rear of the Echo Dot (the side with the USB port and Aux Jack) with the
opening in the iAV2 dock well and place with the ports facing the back.
»
Connect the built-in Aux-in cable on the back of the iAV2 to the Aux jack of your
Echo Dot.
»
You can now “Ask Alexa” to access all the functions of Echo Dot and hear the audio
through the iAV2.
BACK
BACK
“Alexa, stop”
“Alexa, mute” or “Alexa, unmute”
Low Battery
Indicator
When lit, backup
battery needs
replacing
PM
Indicator
When lit,
time is PM
“Alexa, set volume to 5”
“Alexa, turn up/down the volume”
Contact Us: 1•800•288•2792
For full warranty and full instructions
visit: www.ihome.com/support
VOLUME CONTROL
THE DISPLAY
»
Use the volume control on the Amazon Echo Dot to adjust the volume to your desired
level.
»
TIP: You can use Alexa voice commands to change volume or stop/pause playback.
»
TIP: Press the + and – Buttons on iAV2 together during clock setting to switch
display from standard 12 hour to 24 hour display.
1 Clock Setting Button
Press and hold
for 2 seconds
until clock starts flashing to
start clock setting. Adjust with
+/– Buttons. Press again to
complete clock setting.
NOTE: Alexa cannot set clock
2/3 +/– Setting Buttons
Press and release to adjust
clock during setting (hold for
rapid adjust)
4 Dimmer Button
Press and release to adjust
display brightness from high
5 Backup Battery Compart-
ment
Unscrew door with Phillips
screwdriver. Insert 1 CR2450
battery as shown to maintain
clock setting during power
interruption.
6/7 AC adapter/DC Jack
Connect the included AC
adapter to the DC jack located
on the back of the unit and
connect the other end to a
working wall outlet.
8 USB Charge Device Port
Connect a standard USB cable
(not included) to charge
mobile devices.
9 Dot USB Charge Port
10 Hardwired Aux cable
Powering Amazon Echo Dot
Amazon, Alexa, Echo Dot and all
related logos are trademarks of
iAV2-A-A
Service Number:
DC 3V, CR2450 x 1
Clock Backup:
DC 7.5V, 2A
AC Adaptor:
Designed and Engineered in the USA
Made for the Amazon Dot (2nd Gen)
Manufactured & Serviced by SDI Technologies Inc.
www.ihome.com Toll Free: 1-800-288-2792
Made in China Patents: www.ihome.com/patents
iAV2
M
O
D
EL
BOTTOM
5
2
1
3
BACK
4
TOP
Amazon Echo Dot Dock
RESET
RESET
TEST
TEST
8
9
7
10
6
NOTE:
Remove Battery
pull tab before use
Playing Amazon Echo Dot Audio
DC 12V, 1.5A
»
NOTE: Backup battery only maintains clock settings
during a power interruption. Unit does NOT operate on battery.
