iHome HDL95, Быстрый старт, Страница: 7 / 8

-1 +1 auto
DST
time zone high low
volume level DC 12V 2.7A
time sync/set
alarm set
1
3 2 1
HDL95
Staff Quick Start Guide
Included
• HDL95 system
• 100V-240V universal AC adaptor
Set Up
Connect AC adaptor
to DC jack/wall outlet
Remove pull tab from Backup Battery
Compartment
located on bottom of the
unit. When Low Battery Icon appears on display,
replace backup battery with 1 fresh CR2450
battery. Keep unit connected to AC power when
replacing battery or you will lose settings.
Remove thumbscrew
and remove back cover
to access staff controls
Secure the attached Security Tether to
a wall or other permanent surface.
CAUTION
: DO NOT attach to an AC
outlet or cause it to become entangled
with anything that can create a
hazardous situation.
12V 2.7A
outlet
The unit ships with the Daylight Saving Time (DST) switch in
Auto position, and will automatically adjust when the time
changes in March and November.
Setting Clock Using Time Sync
Daylight Saving Time
a ) Connect a Lightning-compatible
iPhone to the Dock
Press the time sync/set Button
on the back of the unit to instantly
set the time on the HDL95.
b
NOTE
: For the fastest, most accurate time setting,
set the clock using Time Sync with
a) a docked iPhone
OR
b) an iPhone connected to the USB port
iPhone time is always current because it pings off cell towers;
iPad or iPod are only accurate to the last time they were
synced to a computer.
Make sure the DST switch is in AUTO position.
If you do not have an iPhone or if time sync fails,
set the clock manually.
b ) connect any iPhone to the USB port using
the USB cable that came with the iPhone
-1 +1 auto
DST
time sync/set
a
Or
Manual Clock Setting
Press the time sync/set button
Press the time sync/set button
Press the + or - button to set time
NOTE: Time display can be set to 12 or 24 hours at any time
during clock setting
Clock Setting
Press the + or - button to set year
Press the + or - button to tune to
a desired station (hold to search for
next clear station)
time sync/set
Press and hold the time sync/set button
to enter clock setting mode
2 SECS
3 SECS
Beep
FM Radio
FM Presets
Setting FM Presets
Maintenance
Press radio button
to turn on radio
Presets are numbered 1-3.
Press any Preset button
to call up that Preset.
Follow steps above to set all 3 FM presets
Extend FM antenna for best reception
Once staff has completed setup, replace security cover on
back of unit and tighten thumbscrew.
Press the + or - button
to select station to preset
Press and hold a
preset button (1-3) for
3 seconds to confirm.
HDL95 Quick Start Guide - Inside
Size: 432 x 140 mm
Printing Color: Black
Mat’l: 100 gsm WF paper
Apr. 5, 13
Press the + or - button to set date
Press the time sync/set
button to confirm Clock
Setting
Beep
Beep
time sync/set
time sync/set
time sync/set
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,
such as thinner or similar materials can damage the surface of the unit.
WARNING: Lithium batteries can explode or cause burns if
disassembled, shorted, recharged, exposed to water, fire, or
high temperatures. Do not place loose batteries in a pocket,
purse, or other container containing metal objects, mix with
used or other battery types, or store with hazardous or
combustible materials. Store in cool, dry, ventilated area. Follow
applicable laws and regulations for transport and disposal.
To toggle time display
between 12 or 24 hours,
press alarm set button
during clock setting