5
3. Do not directly touch the probe with your fingers or blow on it.
Measurements taken using a damaged or dirty IR probe may be inaccurate.
4. Keep the product at a place inaccessible to children to prevent children from
swallowing the batteries or small parts.
5. Do not throw the thermometer or batteries into fire to prevent explosions.
6. Remove the batteries from the thermometer if the device will not be used for
more than one month.
7. If you are allergic to plastic/rubber, please don’t use this device.
8. The materials (ABS, TPU, metal) of expect contact with patient had passed
the ISO 10993-5 and ISO 10993-10 standards test, no toxicity, allergy and
irritation reaction. They are in compliance with the MDD requirements. Based
on the current science and technology, other potential allergic reactions are
unknown.
9. The patient can be an intended operator. All functions of the unit can be
used safely by patient.
10. This product should be considered a personal device. Clean and sanitize
the product properly to prevent cross contamination.
If performance of the instrument may be adversely affected should one or
more of the following occurred:
1) Operation outside of the manufacturer-specified subject temperature
range.
2) Operation outside of the manufacturer-specified operating temperature
and humidity ranges.
3) Storage outside of the manufacturer-specified ambient temperature
and humidity ranges.
4) Mechanical shock.
5) Manufacturer-defined soiled or damaged infrared optical components.
11. The patient is an intended operator.
12.
This product contains batteries and recyclable electronic waste. To
protect the environment, do not dispose of it in the household waste, but take it
to appropriate local collection points.
13. This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment.
14. This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
15. The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
16. This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
