iGuard FPS110
P.29
Administration – Terminal Setup
You can use this page to setup the network configuration of the device as follows: -
Network Setting & Operation Setting
Please refer to the section “Setting the Network / TCP/IP address” on page 12 for
explanation of these entries.
Time Attendance Management Options
Default In / Out: This should be set to
Follow IN/OUT Trigger
, and the default
In / Out status will follow the settings specified in the
In/Out Trigger
page.
Please refer to the description in
Administration – In/Out Trigger
later in
this section.
Show Chinese On Terminal: Check the Enable checkbox if you want to show some
pre-defined
Chinese characters in the LCD display of the unit.
Web Server Options
Access Restriction: This is for security purpose in specifying a valid IP address range
for accessing the device. Select the "No IP Address Restriction" so any machine
from anywhere in the world can access the device. If you want to restrict a specified
