IgniteNet SunSpot AC1200, Руководство пользователя

Страница: 31 / 67

Chapter 3
| Network Settings
Ethernet Settings
– 31 –
Ethernet Settings
The Ethernet Settings page configures the network behavior of the Ethernet ports,
indicating that a port provides an Internet connection for wireless clients attached
to the local network (routed to the Internet), is bridged directly to the Internet,
connected to the guest network, or provides hotspot service.
The following items are common for all pages under Ethernet Settings:
◆
Status — Enables or disables this port. (Default: ON)
◆
Auto-negotiation — Enables or disables auto-negotiation for a given
interface. (Default: ON)
1000BASE-T does not support forced mode. Auto-negotiation should always be
used to establish a connection over any 1000BASE-T port.
When auto-negotiation is enabled, the access point will negotiate the best
settings for a link based on advertised capabilities.
Figure 22: Ethernet Settings – Internet Source
The following status message is displayed if an interface is connected to the
Internet:
◆
“This port is the internet source for this product. Configure Internet Settings”
If more than one interface is connected to the Internet, only the last configured
interface is used.