16
THERMAL DISINFECTION
When a water heater is installed in the system and an electric
heating element is integrated, the system periodically performs
thermal disinfection. In the water heater settings window
(Window 12)
you can see information on the time of the next
thermal disinfection.
Clicking the
Thermal Disinfection
takes you to the disinfection
time setting window
(Window 13)
, where you can select the
desired disinfection time.
In the
Disinfection Time
window, you can select:
the day of the week or days when you want the water
heater to be disinfected;
the time you want the water heater to be disinfected.
After selecting the days of the week and the preferred time, click
Set
.
SYSTEM STATUS
In the
System Status
window
(Window 14)
you can see the
device settings, such as:
temperature of the glycol delivered to the ground;
temperature of the glycol returning from the ground;
temperature of the supplied heating water;
temperature of the returning heating water.
STATISTICS SECTION
Clicking the
Chart
icon on the bottom bar will take you to the
Statistics
.
Home heating,
(Window 15)
where you will see daily,
weekly, monthly or yearly energy consumption statistics, heat
production statistics and coefficient of performance.
IMPORTANT!
When you select the annual statistics view, you will see the
seasonal coefficient of performance
(SCOP) below the graph.
The blue bar shows how many kilowatt-hours of electricity were consumed during the selected period
,
and black
–
the number of kilowatt-hours of heat produced.
Click on a column to see its exact value.
Pressing “
>
” will take you to the water heating statistics window.
In the window “
Statistics. Water heating.
”
(Window 16)
you can see daily, weekly, monthly or yearly energy
consumption and heat production statistics.
The blue bar shows how many kilowatt-hours of electricity were consumed during the selected period
,
and black
–
the number of kilowatt-hours of heat produced.
Click on a column to see its exact value.
Window 13
Window 14
Window 15
Window 16
