Igloo STERYLIS ULTRA-220 Скачать руководство пользователя страница 19

Страница: 19 / 32

STERYLIS ULTRA Operating Manual

Starting the device and selecting the operating mode

“Filtration” mode

“UV-C air disinfection - standard mode” operating mode

The device can operate in four operating modes, the activation of which is forced by means of appropriate

buttons on the user panel. The following modes are available: Filtration, UV-C air disinfection – standard

mode, UV-C air disinfection – silent mode and O

sterilisation

To start the „Filtration” mode of operation, press and hold the START button located at the green filtering

mode indicator. The filter mode light will start blinking at a high frequency (the device will check the

proper functioning of the relevant actuators) and then it will start to light steadily and the device will start

working in the selected mode. If any errors are detected, the unit will go into standby mode and display

the corresponding error codes on the display in the „STERILISTION” section.

The filtration mode can also be directly selected if the unit is in disinfection mode. To switch from

disinfection mode to filtration mode, press and hold the START button located at the green filtration mode

light.

To interrupt the filtration process, press and hold the START button located at the green filtration mode

light again.

To start the „UV-C air disinfection - standard mode” operating mode, press and hold the START button

located at the green standard mode light. The standard mode light will start blinking at a high frequency

(the device will check the proper functioning of the relevant actuators) and then it will start to light steadily

and the device will start working in the selected mode of operation. Confirmation of the disinfection mode

is the operation of the front panel illuminated on the unit. If any errors are detected, the unit will go into

standby mode and display the corresponding error codes on the display in the „STERILISTION” section.

The standard mode can also be directly selected if the unit is in silent disinfection or filtration mode. To

switch from silent disinfection or filtration mode to standard disinfection mode, press and hold the START

button located at the green standard mode light.

To interrupt the standard disinfection process, press and hold the START button next to the green

standard mode light again.

To start the device, insert the power cord plug into an electrical outlet. The

voltage required for proper operation is 230 V, 50 Hz. Then set the main switch

of the device to „ON”.

Содержание STERYLIS ULTRA-220

































Результаты поиска

Содержание STERYLIS ULTRA-220

Отзывы:

Похожие инструкции для STERYLIS ULTRA-220

Бренды по названию

Популярные бренды

Igloo STERYLIS ULTRA-220, Руководство пользователя

Результаты поиска

Содержание STERYLIS ULTRA-220

Отзывы:

Похожие инструкции для STERYLIS ULTRA-220

Бренды по названию

Популярные бренды