10
CLEANING & MAINTENANCE
Remote control button description
NOTE:
• The remote control should be normally used within 5 metres of the front of the product and 30
degrees of the deviation angle.
• Battery acid can be harmful, so please always recycle waste batteries safely and separately.
Oscillation
Set Wind Type
Cool Wind
Startup/Standby
“+” increase Wind Speed
“-” decrease Wind Speed
Delay Timer
AAA Battery, 1.5 V
Use manganese or alkaline batteries of type
“AAA”. Do not use rechargeable batteries.
NOTE: On the unit control panel, shows Wind Type selection. On the remote it is shown by
NOTE: On the unit control panel, selects Cool Wind. On the remote, this same function is shown
by .
NOTE:
• Disconnect the power before cleaning the product. Clean after the product is shut down for two
minutes.
• Prevent from using any abrasive tools and solvents that may damage the surface to clean up the
product. Detergent can be used for cleaning, and then wiped clean with a dry cloth afterwards.
Prevent from washing the machine body with water directly, and wash disassemble parts (honeycomb
filter parts) with a soft brush.
• Only replace internal parts once they are fully dry.
• Do not take apart or modify any of the internal pieces. It is recommended that this product should be
checked and cleaned regularly in order to extend its service life.
