![background image](http://html1.mh-extra.com/html/igenix/ig350f/ig350f_instructions-for-use-manual_3927751008.webp)
8
If you are going away and do not want to leave the freezer left on, switch off at the socket and pull the plug
from the mains. Remove any food and follow the cleaning instructions in the “Cleaning and Maintenance”
section previously.
Note:
Leave the door ajar as this will prevent odours accumulating in the freezer and will allow the unit to dry
completely.
Product Specification
Model
IG350F
Climate Class
N/ST
Electric Protection Type
I
Total Net Capacity (Litres)
80
Voltage (V)
220
– 240
Frequency (Hz)
50
Current (A)
0.5
Noise (dB)
40
Energy Consumption (kWh / 24h)
0.460
Refrigerant
R600a
Gross Weight (Kg)
21
Interior Temperature (˚C)
≤-18
Energy Grading
A+
Freezing capacity
4kg/24h
Disposal of Old Electrical Appliances
The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in normal unsorted municipal waste.
Old appliances must be collected separately in order to optimise the recovery and recycling of the
materials they contain and reduce the impact on human health and the environment. The crossed out
“wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the
appliance it must be separately collected. Consumers should contact their local authority or retailer for
information concerning the correct disposal of their old appliance.
Troubleshooting
If you are having problems with your fridge, please use our troubleshooting guide below. If you are
unable to resolve the issue using the guide please ring our Customer Service Department on
01473 271 272. Please have the model code, batch number and purchase information available.
Problem
Possible Cause
Solution
The freezer does not work.
1. Not properly plugged into the
mains wall socket.
2. No electricity in the mains wall
socket.
3. The door is not closed properly.
1. Plug in firmly.
2. Check fuse or breaker.
3. Make sure the door is properly
aligned and creates a seal
around the door.