![background image](http://html1.mh-extra.com/html/igenix/ig348r/ig348r_user-manual_3943314006.webp)
6
Levelling the unit
To level the appliance you will need to adjust the levelling feet
found at the front of the appliance.
If the appliance is not level the doors and magnetic seal
will not align properly.
Reverse the door
The appliance door can be fitted to open to either the left or the right depending on its location. The
appliance will have to be tilted and supported in order to carry this out. It is advisable to get some help
during this procedure.
Important: Do not lay the appliance flat as this may damage the coolant system. Take care when fitting
and tightening screws.
To change the direction of the door, please follow these instructions:
1. Ensure the appliance is unplugged and empty.
2. Remove the top right hinge cover.
3. Undo screws and remove hinge.
4. Remove the top left screw cover.
5. Move the hinge pivot cover from the
left side to the right.
6. Remove the door by lifting upwards off
of the hinge and place on a padded
surface to prevent damage.
7. Unscrew the bottom hinge on the freezer door and remove and
place on a padded surface to prevent damage.
8. Remove door holder and replace on
the opposite side.
3.
2.
4.
5.
7.
8.