11
Drainage Channel
• The drainage channel must be cleaned regularly to prevent a build-up of impurities; this can be found
on the interior back wall of your appliance.
• Use a damp clean cloth and wipe the channel clean, then use a pipe cleaner or similar flexible object
to clean the drainage hole to prevent blockages.
Going away
If you are going away and do not want to leave the appliance left on, switch off at the socket and remove
the plug from the mains sockets ensuring not to pull the cord. Remove any food and follow the cleaning
instructions in the “Cleaning and Maintenance” section.
Important: Leave the door ajar as this will prevent odours and mould accumulating in the appliance
and will allow the appliance to dry completely.
Power Cut
In the event of a power cut keep the appliance door closed to maintain the temperature inside.
Operating Sounds
The cooling gas which circulates in the cooling circuit may make a slight noise (bubbling sound) even
when the compressor is not running. Do not worry this is quite normal.
If these sounds are different check that:
• The appliance is well levelled
• Nothing is touching the rear.
• There is not anything on the appliance that may be vibrating
Bulb Replacement
• Turn the thermostat control to Setting 0 to switch off.
• Disconnect the appliance from the mains supply.
• Remove the screw on the bulb cover.
• Pull the lamp cover off.
• Unscrew the bulb and replace with a new bulb of the correct size and type.
• Refit the bulb cover and replace the screw.
• Plug in the appliance to the mains and turn the thermostat control to right position.
