14
5.2 Type of connection
Standard
: flanges according to DIN
On request
: flanges according to ASME
Welding end or Socket Welding according to DIN or ASME
5.3 Materials
Parts in contact with the medium: C steel or stainless steel according to DIN or ASME.
Pressure holding components: C steel or stainless steel according to DIN or ASME.
5.4 Application limits
5.5 Corrosion resistance
The safety of the unit is not influenced by corrosion if it is used as intended.
5.6 Rating plate / Marking
The following data are indicated on the identification plate:
* marking depending on the realization
A
Date of manufacture
B
Type of unit
C
Max. all. pressure
D
Max. all. temperature
E
Nominal pressure (not listed)
F
Nominal diameter
G TAG-no. (Optional)
Max. all. pressure
PS
[bar]
100
200
Max. all. temperature
TS
[°C]
312
367
*
IGEMA GmbH
Mess- und Regelsysteme
Antwerpener Straße 1
Germany
– 48163 Münster
G
