iGage iG9 User Manual
23
Compatible Field Software
The following field software tools are compatible with the iG9 receiver:
GeoMax X-PAD Ultimate:
fully compatible
MicroSurvey Field Genius:
fully compatible
CHCNav LandStar7:
fully compatible
Carlson SurvCE version 5.09 through 6.08:
compatible without IMU Tilt Enabled
Carlson SurvPC version 6.07 through 6.08:
compatible with IMU Tilt Enabled
Note: Carlson has dropped all support for the iG9 receiver from Version 6.09 forward of both
SurvCE and SurvPC.
Very detailed configuration and use instructions are available for X-PAD, LandStar7 and SurvPC.
Contact iGage to receive either PDF or hardcopy versions of these Getting Started Guides.
Using IMU Tilt Compensation
The iG9 receiver has a accurate, fast, IMU based Tilt Compensation function built into the receiver.
Remember that the iG9a does not have Tilt Compensation.
The tilt compensation is fully supported by X-PAD, LandStar7, Field Genius and SurvPC (versions 6.05
through 6.08). SurvCE does not support Tilt Compensation.
Step-by-step Tilt compensation instructions follow for X-PAD, LandStar7 and SurvPC.
GeoMax X-PAD
To enable the IMU Tilted Pole corrections from
the Survey or Staking screens, click on the
Tools
button at the bottom of the
SURVY
or
STAKING
screen:
On the
Tools
menu:
Click on
Survey setup
.
GNSS settings
will be shown.
Drag the
GNSS settings
menu down to
Sensors
mode
: