IFM SmartPLC DataLine AC1423, Руководство по эксплуатации устройства

Страница: 179 / 200

SmartPLC DataLine with EtherNet/IP device interface
179
>
Details of the diagnosis area
41581
>
Diagnosis - System diagnosis
41448
Offset
Word no.
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
n - - - - - - - - - - - - PS GI OT ISE
Legend:
Flag Description
ISE Internal System Error Interner Systemfehler
OT over temperature: temperature inside the device has exceeded the permissible max. temperature value
GI gateway inactive: the gateway mode was deactivated
PS PLC stop: The controller was stopped
>
Diagnosis - AS-i diagnosis
41466
Offset
Word no.
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
n - - PF19 PF22.5 EF S0 PM IME - - - DAE PE CEIP CEAS CEMS
n+1 Voltage AS-i+ to AS-i- in mV
n+2 Voltage FE to AS-i- in mV
n+3 Symmetry in % (-100% ... +100%)
Legend:
Flag Description
IME internal master error: Internal system error of an AS-i master
PM projection mode: AS-i master was set to the projection mode.
S0 slave 0 detected: New slave 0 was detected.
EF earth fault: Earth fault was detected
PF22.5 22.5V AS-i Power-Fail (classic AS-i Power) was detected.
PF19 19 AS-i Power-Fail (Power24) was detected.
CEMS Configuration Error
– Missing Slave: AS-i configuration error, one or several slaves are projected, but not
available.
CEAS Configuration Error
– Additional Slave: AS-i configuration error, one or several slaves are available, but
not projected.
CEIP Configuration Error
– Invalid Profile: AS-i configuration error, the slave profiles of one or several slaves
differ from the projected slave profiles.
PE periphery error: One or several AS-i slaves have a periphery error.
DAE duplicate address error: One or several multiple-addressing faults occurred.