
3
UK
10�3�6 Counter reset using an external signal ���������������������������������������������18
10�4�1 Limit monitoring temperature (OUT2) �����������������������������������������������18
10�4�2 Analogue output temperature (OUT2) ����������������������������������������������18
10�5�1 Standard unit of measurement for volumetric flow ���������������������������18
10�5�3 Measured value damping �����������������������������������������������������������������19
10�5�4 Error behaviour of the outputs ����������������������������������������������������������19
10�5�5 Setting of the standard pressure ������������������������������������������������������19
10�5�6 Setting of the standard temperature �������������������������������������������������19
10�6�1 Read min/max values �����������������������������������������������������������������������20
10�6�2 Restoring the factory settings �����������������������������������������������������������20
11�2 Changing the display unit in the Run mode �����������������������������������������������21
1 Preliminary note
1.1 Symbols used
►
Instruction
>
Reaction, result
[…] Designation of pushbuttons, buttons or indications
→
Cross-reference
Important note
Non-compliance can result in malfunction or interference�
2 Safety instructions
• Please read this document prior to set-up of the unit� Ensure that the product is
suitable for your application without any restrictions�