IFM SBG2 Series, Руководство по эксплуатации

Страница: 17 / 25

17
UK
9 Parameter setting
Parameters can be set before installation and set-up of the unit or during opera-
tion�
If you change parameters during operation, this will influence the function
of the plant�
► Ensure that there will be no malfunctions in your plant�
During parameter setting the unit remains in the operating mode� It continues to
monitor with the existing parameter until the parameter setting has been completed�
The parameters can also be set via the IO-Link interface (→ 4.3) �
9.1 Parameter setting in general
1� Change from the RUN mode to the main menu [●]
2� Select the requested parameter [
▲
] or [
▼
]
3� Change to the setting mode [●]
4� Modification of the parameter value [
▲
] or [
▼
] > 1 s
5� Acknowledge the set parameter value [●]
6� Return to the RUN mode → 9.1.3
If [C�Loc] is displayed when attempting to change a parameter value, a
change is made via a parameter setting software at the same time (tempo-
rary locking)�
If [S�Loc] is displayed, the sensor is permanently locked via software� This
locking can only be removed with a parameter setting software�
9.1.1 Select submenu
► Click [▲] or [▼] to select submenu (EF, CFG, MEM, DIS).
► Briefly press [●] to change to the submenu.
9.1.2 Exit parameter setting or menu level
► Press [ ▲ ] + [ ▼ ] simultaneously�