IFM SAxx04 Series, Руководство по эксплуатации

Страница: 5 / 27

5
UK
4 Function
• The unit detects flow based on the calorimetric measuring principle�
• The unit also detects the medium temperature�
• It features an IO-Link interface for parameter setting�
• The unit displays the current process value�
It generates 2 output signals according to the parameter setting:
OUT1:
Parameter setting
-Analogue signal for temperature → 10.3.1
-IO-Link interface for parameter setting → 4.7
OUT2: Parameter setting
-Analogue signal for flow → 10.2.3
4.1 Operating modes (ModE)
The unit provides three selectable operating modes for flow measurement:
Operating mode Medium Display unit
REL liquids, air % (of the taught range → 10.2.4 )
LIQU liquids m/s, l/min, m3/h (fps, gpm, cfm)
GAS air m/s, l/min, m3/h (fps, gpm, cfm)
The selected operating mode has no effect on the temperature measure-
ment, only absolute values in °C or °F are indicated.
The parameter settings are saved in the respective operating mode, i�e�
when the operating mode is changed, the settings are not lost�
If the operating modes LIQU and GAS are selected:
► Define the medium and the internal pipe diameter (→ 10.2.1) �
► If required, calibrate curve of measured values (→ 10.4.7) �