IFM R1D Series, Руководство по эксплуатации

Страница: 9 / 36

IO-Link radar position sensor R1Dx
9
4 Getting started
For fast set-up, carry out the following steps:
1. Install the device so that it can detect the required area and is not obscured ( Ò Mounting / 13) .
2. Connect the device to an IO-Link master and establish a connection between them.
3. Use the Vision Assistant or ifm moneo to make the required settings on the device.
The software is required to configure the device. The software can be downloaded at
www.ifm.com .