24
9.6 Diagnostic functions
9.6.1 Read min/max values for the system pressure
► Select [Hi] or [Lo] and briefly press [●].
[Hi] = maximum value, [Lo] = minimum value�
Delete memory:
►
Select [Hi] or [Lo]�
► Press [▲] or [▼] and keep pressed until [----] is displayed.
► Briefly press [●].
9.6.2 Read overload processes
• HIPC: Number of overload processes
HIPC counts how often the limit HIPS has been exceeded�
The limit must be exceeded for at least 0�5 ms�
• HIPS: Setting of the threshold for the overload counter�
The parameters HIPC and HIPS are only available via IO-Link
communication�
10 Operation
After power on, the unit is in the Run mode (= normal operating mode)� It carries
out its measurement and evaluation functions and provides output signals
according to the set parameters�
Operation indication
(→ 7 Operating and display elements)
�
10.1 Read the set parameters
► Press [●].
► Press [▲] or [▼] until the required parameter is displayed.
► Briefly press [●].
> The unit displays the corresponding parameter value for approx� 30 s; then it
changes to the process value display�
