ifm Vision Assistant O3M
98
11.4.2
Visualisation of 3D ROIs as a projection on the fl oor
The ROI visualisation type "3D floor projection" shows the provision of
the ROI groups in the x, y and z axis (length and width) as a coloured
overlay . The coloured overlay is visualised as a projection on the floor .
"Output" refers to the measuring result of the ROI group
(→ „12.2 Global settings“).
The ROI visualisation type "3D floor projection" is only suitable for:
● three-dimensionally defined ROIs (→ „12.1 ROI mode“),
●
ROIs lying next to each other (x and y axis)
(not suited for ROIs stacked on top of each other (z axis) .
In the figure on the left, the provision of 2 ROI groups is visualised as a
coloured overlay on the floor and the X values as a text .
[Colour map] is set as "colour mode" .
The "moving reference line" is set to [white] .
The output of the ROI group can additionally be shown as text . In "text
visualisation ROI results", the control fields can be activated:
●
X value
●
Y value
●
Z value
The text fields can overlap if several ROI groups are provided at
the same time .
In the list "colour mode", the behaviour of the colours of the colour
overlay can be set . The following colour modes are available:
●
[Colour map]
The colour changes with the set reference value .
●
[Colour switch]
After a threshold value is reached, there is a change between 2
colours .
●
[Logic output]
The colour changes according to the condition of the virtual digital
outputs of the ROI groups .
●
[Defined colour]
The colour setting is fixed and does not change .
