IFM O3D3 Series, Краткое руководство пользователя

Страница: 8 / 13

8
5 Installation
During installation note the following:
► Use cables with strain relief.
► Keep areas
①
clear of objects.
► Within area
②
position the object to be detected
③
closer to the device than
any other objects.
► Mount the device so that the focus adjustment screw is freely accessible with a
screw driver.
► Mount the sensor with spring washers
④
with max. 3 Nm.
> Use spring washers for the O3D30x devices only.
①
②
③
①
④
Fig 1 : installation with clamp (left fig.) and spring washers (right fig.)
If the device is permanently used in wet areas, the nut of the M12 Industrial
Ethernet cable (e.g. E11898) may corrode. Use a cable with a high-grade
stainless steel nut for permanent use in wet areas.