Multicode Reader
O2I5xx
13
5.3 Mounting with dome illumination
2
3
4
1
5
Fig. 8: Installation using the mounting set E2D501
1:
M4 screws
2:
threaded M4 holes (depth 7 mm)
3:
bracket
4:
clamp
5:
dome illumination
u
Fasten the bracket to the threaded M4 holes of the unit using two M4 screws. Tightening torque
max. 2.1 Nm.
u
Fasten the bracket to the dome illumination using four screws.
u
Fix the clamp to the bracket.
5.4 Aligning the unit and object
The unit is aligned with 2 laser markings. The laser markings mark an area on the surface. The unit
detects an object in the area.
Aligning the unit:
u
Press the teach button for 3 seconds.
w
The 2 laser markings light up.
u
Place the unit to the centre of the object.
2000
100
27
Fig. 9: Side view of the unit
