MK59xx
Cylinder sensor with IO-Link
14
8 Operating and display elements
2
3
4
5
1
1:
Fastening clamp
2:
LED green (ready for operation)
3:
LED2 yellow (switching signal channel SSC1.2)
4:
Sensing face
5:
LED1 yellow (switching signal channel SSC1.1)
The two LEDs are permanently assigned to the switching signal channels: LED1 to SSC1.1 and LED2
to SSC1.2.
If the switching status LEDs are yellow, this signals the active status of the switching signal channel.
•
If the switching signal channel is set to the switch point logic [High active], the LED goes on when
the output is closed.
•
If the switching signal channel is set to the switch point logic [Low active], the LED goes on when
the output is open.
.
