LMT0xA
Binary level sensor
16
7.9.3 Fault during the teach operation
u
Faulty teach operation
w
Teach operation stopped
w
LEDs are flashing green/yellow with 8 Hz.
w
The unit returns to the operating mode with unchanged settings.
Possible faults:
•
Time error (teach time too long / too short).
•
Internal sensor signal not clear.
•
Wrong output function: (
Ò
Parameter setting via the teach input)
•
Process value too low (< 9 %, e.g. for powders), SPx/rPx must be set manually (
Ò
Parameter
setting via PC and IO-Link interface).
