IFM IO-Link master-PROFINET AL1102, Руководство по эксплуатации

Страница: 39 / 59

IO-Link Master with PROFINET Interface StandardLine 8 Ports IP 65 / IP 66 / IP 67
39
>
9.2.7 Read I&M datasets
52484
I&M0 provide the user with device-specific basic information. This ensures reliable identification of the
device, the device's hardware and software components as well as the manufacturer.
The datasets I&M1 to 3 offer the programmer the possibility to store project-specific information on the
device.
The programmer can access the I&M0 datasets of the slots 0 and 1 in the PROFINET projection
software by means of the following functions:
Symbol / function
block Description Notes
GET_IM_DATA

Function block for reading the I&M datasets of a device

GET_IM_DATA only supports the reading of the I&M0
dataset
Input parameters:

IM_TYPE = 0
RDREC Function block for acyclic reading of datasets Input parameters:

I&M0: Index = 0xAFF0

I&M1: Index = 0xAFF1

I&M2: Index = 0xAFF2

I&M3: Index = 0xAFF3
WRREC

Function block for acyclic writing of datasets

Observe access rights on datasets!
Input parameters:

I&M1: Index = 0xAFF1

I&M2: Index = 0xAFF2

I&M3: Index = 0xAFF3
>
9.2.8 Detect diagnostics and alarms
52485
Available alarms and diagnostic messages:
→
Diagnostic and alarms (
→ S.
57 )
Symbol Operational block Description
I/O_FLT1 OB82 Diagnostic alarms
I/O_FLT2 OB83 Connect/disconnect alarms
RACK_FLT OB86 Module rack failure