UK
Operating instructions FX460
27
TOTAL TIME SET VALUE
A set/reset command (SET TOTAL TIME command, via control input) sets the total timer to the value set
here� Parameter only visible if TOTAL TIME MODE parameter is activated�
000000:00
Lowest value (reset)
…
999999:59
Highest value
9.6 Counter mode
In this menu, operation can be defined as position indication, pulse, totaliser,
differential, up or down counter� Inputs A and B are active� This menu is only
displayed if the corresponding OPERATIONAL MODE is selected in the GENERAL
MENU�
COUNT MODE
Selection of the timer configuration
A SINGLE
Input A is the counting input� Input B determines the counting direction:
"LOW" = up "HIGH" = down
A + B
Total: counts pulses on input A + pulses on input B
A - B
Difference: counts pulses on input A – pulses on input B
A/B 90 x1
Up/down counter for pulses with 2x90° displacement (simple edge
evaluation)
A/B 90 x2
Up/down counter for pulses with 2x90° displacement (double edge
evaluation)
A/B 90 x4
Up/down counter for pulses with 2x90° displacement (quadruple edge
evaluation)
FACTOR
Pulse evaluation factor�
Example: With a setting of 1�23456, the unit displays the value 123456 after 100000 input pulses�
0�00001
Lowest value
1
Default value
9�99999
Highest value
SET VALUE
With a reset command (e�g� via keyboard or control input) the counter is set to the value set here�
-99999999
Lowest value
0
Default value
+99999999
Highest value