IFM efector100 G1503S Скачать руководство пользователя страница 5

Страница: 5 / 47

2 Safety instructions

• Follow the operating instructions�
• Improper use may result in malfunctions of the unit� This can lead to personal

injury and/or damage to property during operation of the machine� For this

reason note all remarks on installation and handling given in these instructions�

Also adhere to the safety instructions for the operation of the whole installation�

• In case of non-observance of notes or standards, specially when tampering

with and/or modifying the unit, any liability and warranty is excluded�

• The unit must be installed, connected and put into operation by a qualified

electrician trained in safety technology�

• The applicable technical standards for the corresponding application must be

complied with�

• For installation the requirements according to EN 60204 must be observed�
• In case of malfunction of the unit please contact the manufacturer� Tampering

with the unit is not allowed�

• Disconnect the unit externally before handling it� Also disconnect any

independently supplied relay load circuits�

• After setup the system has to be subjected to a complete function check�
•

Only use the unit under the specified operating conditions (→ 10 Technical

data)� In case of special operating conditions please contact the manufacturer�

•

Use only as described below (→ 4).

Содержание efector100 G1503S
















































Результаты поиска

Содержание efector100 G1503S

Отзывы:

Бренды по названию

Популярные бренды

IFM efector100 G1503S, Руководство по эксплуатации

Результаты поиска

Содержание efector100 G1503S

Отзывы:

Бренды по названию

Популярные бренды