IFM efector 360 O3D301, Краткие инструкции

Страница: 6 / 9

6
6 Installation
During installation note the following:
► Use cables with strain relief�
► Keep area "A" clear from objects�
► Position the object to be detected ("C") closer to the device than any other
objects within area "B"�
► Mount the camera so that the focus adjustment screw is freely accessible with
a screw driver�
If the device is permanently used in wet areas, the nut of the M12 Industrial
Ethernet cable (e�g� E11898) may corrode� Use a cable with a high-grade
stainless steel nut for permanent use in wet areas�
6.1 Mounting accessories
Depending on the location and type of installation, you can use the following
mounting accessories:
Description Article no�:
Smart Camera mounting set E3D301
Smart Camera cooling element E3D302
Smart Camera heat conductor E3D303
2x Smart Camera cooling element E3D304
You can find more information about the accessories at:
www�ifm�com
→ Data sheet direct → e.g. O3D303 → Accessories
B
C
A A