CR0708 CR0709
5
3 Intended use
The freely programmable controllers of the "ecomatController" series are rated for use under difficult
conditions: this includes an extended temperature range, strong vibration, intensive EMC interference.
This is a class A product. This product may cause radio interference in domestic areas.
u
If required, take appropriate EMC screening measures.
•
Controller for mobile machinery applications.
•
CODESYS V3.5 programming system (in a version approved by ifm).
•
For the supply of the controller (on-board system, PELV power supply):
•
Multifunctional inputs and outputs, their operating mode (e.g. current, voltage, frequency input;
PWM, digital output) and use of which can be configured in one of the controllers.
•
Sensors and actuators can be connected and used (depending on the required input and/or output
type).
•
Connection of sensors or actuators via CAN interfaces. Connection to other controllers via CAN.
•
Only use the device within the limits of the technical data:
Ò
Technical data.
•
Mounting location: Installation location
For the controller, no direct connection to IT structures is intended. If this application is required,
the users have to implement it (e.g. by using their own additional components).
3.1 Distinctive features
These instructions refer to the derivatives CR0708 and CR0709 of the “ecomatController” series. The
devices differ in the following features:
Feature
CR0708
CR0709
Number of inputs
20
32
Number of outputs
17
28
Number of output groups
2 (supplied via VBB
0/1
)
3 (supplied via VBB
0...2
)
3.2 Predictive incorrect use
•
Installation on the motor/engine is not permitted.
•
No use in an environment with ionising radiation.
The unit is not approved for safety-related tasks in the field of operator protection.
