CR0708 CR0709
20
7 Set-up
7.1 Interfaces and system requirements
The users are responsible for the correct function of the application programs which they
created themselves. If necessary, they must additionally carry out an approval by corresponding
supervisory and test organisations according to the national regulations.
The programmer creates the application program with the IEC 61131-3 compliant CODESYS
programming system and loads the applications via the Ethernet, RS-232 or CAN interface to the
controller. For the required information about installation and set-up, see the programming manual.
Required components:
•
Suitable CODESYS version
•
CODESYS plug-ins
•
CODESYS package for the controller
•
Firmware (note: check firmware version!)
•
Release notes
To program the controller, the persons should be familiar with the CODESYS software.
Moreover, they should be familiar with the following topics:
•
Requirements on programming
•
Required user-specific standards
7.2 Required documentation
In addition to the CODESYS programming system, the following documents are required for
programming and set-up of the device:
•
CODESYS V3.5 programming manual
The manuals can be downloaded from the internet:
www.ifm.com
CODESYS online help:
www.ifm.com (in the download space with registration)
