IFM ECOMAT 300 AL1000, Руководство по эксплуатации устройства

Страница: 37 / 61

UK
IO-Link master
37
19 Parameterisation
PC Worx
Parameterisation of the ProfiNet device in PC Worx requires at least PC Worx
version 6�30�601� This is part of the AUTOMATION Software Suite, version 1�81,
article number 2985660�
An online data sheet of the device with important technical data and a
configuration file are integrated into PC Worx� If several versions of the
configuration file are available, make sure that you are working with the file version
that corresponds to the firmware/hardware version used�
Other tools
The ProfiNet device is parameterised using the configuration tool of the ProfiNet
controller� For parameterisation integrate the corresponding GSDML file of the
device in the relevant software tool (STEP 7/HW Config, etc�)�
Make sure you use the latest version of the FDCML / GSDML file and the latest documentation for the
device� The latest files and documentation can be found on our web site at www�ifm�com�
20 LLDP - Link Layer Discovery Protocol
The device supports LLDP to IEEE 802�1AB and therefore enables topology
detection of devices that also have activated LLDP�
Advantages of using LLDP:
– Improved error location detection
– Improved device replacement
– More efficient network configuration
The following information is received by or sent to neighbours if LLDP is activated:
– The device sends its own management and connection information to
neighbouring devices�
– The device receives management and connection information from
neighbouring devices�
Engineering tools can be used to represent the LLDP information as a topology
overview�
21 MRP - Media Redundancy Protocol
The device supports the role of a Media Redundancy Client (MRC) in an MRP
network�