62
ifm
Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2
2015-11-30
Menu
AS-i 1 / AS-i 2
>
Digital output
15974
Designation
Meaning
Example / Possible values
[Outputs]
Current values of the digital outputs
(binary and hexadecimal
representation)
=
Data bit is switched off (0 / OFF)
=
Data bit is switched on (1 / ON)
[Jog mode]
The parameter controls the
behaviour of the outputs in the event
of a changed output value.
=
Jog mode disabled ("switch mode")
>
The changes do not affect the output until you quit the
editing mode.
=
Jog mode enabled ("momentary switch mode")
>
The changes immediately affect the output.
>
Analogue output
15975
Designation
Meaning
Example / Possible values
[Outputs]
Current values of the analogue
output channels and information
about their status
[Analogue
status]
Current status of the analogue
outputs
=
Not O.K.
=
O.K.
[Channel x]
Current value of the analogue output
channel x
(x = 1...n; n = number of channels
per AS-i slave)
per digit:
0 ... 9
>
Parameter input
15843
Designation
Meaning
Example / Possible values
[Parameter input]
Current value of the parameter input
(binary and hexadecimal
representation)
= Data bit is switched off (0 / OFF)
= Data bit is switched on (1 / ON)