7
E2M231 / E2M232 monitor for analogue cameras
UK
4.3 Contrast
The [Contrast] key activates contrast setting . Use the [Plus / +] and [Minus / -] keys to
set the contrast . The set contrast is permanently stored .
The contrast must be set separately for each connected camera .
4.4 Brightness
The [Brightness] key activates brightness setting . Use the [Plus / +] and [Minus / -] keys
to set the brightness . The set brightness is permanently stored .
The brightness must be set separately for each connected camera .
4.5 Colour saturation
+
Press the [Contrast] and [Brightness] keys simultaneously to
activate colour saturation setting . Use the [Plus / +] and [Minus
/ -] keys to set the colour saturation . The set colour saturation is
permanently stored .
The colour saturation must be set separately for each connected camera .
4.6 Scan / Back in menu
The [Scan / Back in menu] key displays the view of the connected cameras one after the
other .
If you are in a menu, use this key to navigate Back in menu . The display time of a
camera image can be set in the Service menu (→ „6.3.6 Scanning“).
