E2M231 / E2M232 monitor for analogue cameras
12
6.3.3 Keyboard
The keyboard is set in the [Keyboard] menu .
The [Keyboard sound] and [Beeper volume] settings are
without any function .
●
[Keyboard lock]: Lock access to certain device functions .
– [Standby menu]: Lock access to the standby menu .
– [Operator menu]: Lock access to the user menu .
– [Camera switch]: Lock access to the camera switch .
– [Camera settings]: Lock access to the camera settings .
– [Standby]: Lock access to the standby mode .
6.3.4 Power supply settings
The standby mode of the device is set in the [Power settings]
menu .
●
[Standby mode]: Set one of the following modes for standby:
– [MNU]: Use the [Enter / Standby] key to activate the standby
– [IMM]: Use the [Enter / Standby] key to activate the standby
mode directly .
– [2 S]: Keep the [Enter / Standby] key pressed for 2 seconds
to activate the standby mode .
●
[Standby, camera off]: Deactivate the voltage supply of the
connected cameras in the standby mode .
The standby mode is deactivated by pressing any key .
