IFM DTE801, Руководство по установке

Страница: 5 / 25

5
UK
• Read this document before setting up the product and keep it during the entire
service life�
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
• Only use the product for its intended purpose (→ Functions and features).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator�
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator�
• Protect the device and the cables against damage�
• Use the device outside petrol stations, fuel depots, chemical plants or blasting
operations�
• Do not transport and store any flammable gases, liquids or explosive
substances near the device�
• Contact the manufacturer of the corresponding device in case of any
interference�
• Because of the requirements for electromagnetic interference emissions, the
device is intended for use in industrial environments� The device is not suitable
for use in domestic areas�
• Device safety: Use the device indoors only�
3 Functions and features
The DTE80x device is composed of an evaluation unit and an integrated RFID
read/write head and provides the following functions
• read and write ID tags which conform to the system without contact,
• DTE801: communication with the control level via PROFINET IO,
• DTE802: communication with the control level via EtherNet/IP,
• DTE803: communication with the control level via EtherCAT,
• DTE804: communication with the control level via EtherNet TCP/IP,
• can be configured via a web server�