9
UK
4.1.1 Visualisation of the voltage value at the output
0
10 11
[V]
IO-Link
process
data
0
...
10000
10001
...
11000
[mV]
5 Installation
The M12 connecting parts must not be mechanically stressed when in use in
the application. Depending on the operating conditions, the device is also to be
protected against mechanical stress, e.g. shock or vibration. If required, the device
can be fixed with a mounting clip.
Mounting clip (fasten with M4 screw or
cable ties)
Mounting clip with display attached
The mounting clip is not supplied with the device.
More information about the available accessories at:
www.ifm.com
