IFM CR0452 Скачать руководство пользователя страница 34

Страница: 34 / 209

ifm

Programming Manual BasicDisplay CR0452 v03.02

05 / 2018

Configurations

Set up the runtime system

4.1.2

Update the runtime system

13269

An older runtime system is already installed on the device. Now, you would like to update the runtime
system on the device?

14158

NOTICE

Risk of data loss!

When deleting or updating the runtime system all data and programs on the device are deleted.
► Save all required data and programs before deleting or updating the runtime system!

For this operation, the same instructions apply as in the previous chapter 'Reinstall the runtime
system'.

4.1.3

Verify the installation

14637

► After loading of the runtime system into the controller:

• Check whether the runtime system was transmitted correctly!

• Check whether the correct runtime system is loaded in the controller!

► 1st test:

Test with the

ifm

maintenance tool if the correct runtime system version was loaded:

• Read name and version of the runtime system in the device!

• Manually compare this information with the target data!

► 2nd test (optional):

Check in the application program if the correct runtime system version was loaded:

• read name and version of the runtime system in the device!

• Compare this data with the specified values!

The following FB serves for reading the data:

GET_SW_INFO

(→ p.

164

)

Delivers information about the system software of the device:
• software name,

• software version,
• build number,

• build date

► If the application detects an incorrect version of a runtime system:

bring all safety functions into the safe state.

Содержание CR0452


















































































































































































































Результаты поиска

Содержание CR0452

Отзывы:

Похожие инструкции для CR0452

Бренды по названию

Популярные бренды

IFM CR0452, Руководство по программированию

Результаты поиска

Содержание CR0452

Отзывы:

Похожие инструкции для CR0452

Бренды по названию

Популярные бренды