UK
Operating instructions AX460
7
Voltage spikes on the connections of the device are to be limited to the values of
overvoltage category II�
With regard to installation conditions, wiring, environmental conditions as well as
screening and grounding of connected cables, the general standards for control
cabinet construction in the machine industry as well as the manufacturer's specific
screening instructions apply�
5 General
The device is designed as panel-mounting display unit for analogue signals
(-10 ��� 10 V / 0 ��� 20 mA / 4 ��� 20 mA)�
5.1 Operating mode
In general, all functions can be configured in the parameter menu� The device can
be operated in the following modes:
●
SINGLE:
One-channel operation of input 1�
●
DUAL:
Two-channel operation of inputs 1 and 2�
●
IN 1 + IN 2:
Two-channel operation of inputs 1 and 2, type of linking: addition�
●
IN 1 - IN 2:
Two-channel operation of inputs 1 and 2, type of linking: subtraction�
●
IN 1 x IN 2:
Two-channel operation of inputs 1 and 2, type of linking: multiplication�
●
IN 1 / IN 2:
Two-channel operation of inputs 1 and 2, type of linking: division�
