IFM AX460, Руководство по эксплуатации

Страница: 32 / 45

Operating instructions AX460
32
START UP DELAY 1 (S)
Start-up delay for the switching condition of preselection 1�
Time window until the monitoring function has been activated� This setting only applies for the switching
conditions ¦RESULT¦≤¦PRES¦ and RESULT≤PRES. (Start-up delays 3 and 4 are set automatically.)
0,000 No start-up delay
…
60,000
Start-up delay in seconds
EVENT COLOR 1
Event-dependent colour change of the display for the switching condition of preselection 1� Event Color 1 is
of lowest priority� Event Color 2 ��� 4 can overwrite this colour change�
NO CHANGE
No colour change
CHANGE TO RED Colour changes to red
CHANGE TO GREEN Colour changes to green
CHANGE TO YELLOW Colour changes to yellow
9.13 Preselection 2 Menu
SOURCE 2
Source for preselection 2 (→ 9.12 Preselection 1 Menu)
MODE 2
Switching condition for preselection 2, (→ 9.12 Preselection 1 Menu) (except tracking preset)
see Preselection 1 Menu
RES≥PRES-TRAIL Tracking preset 2:
Display value greater than or equal to preselection 1 – preselection 2
Preselection 2 is the tracking preset of preselection 1�
HYSTERESIS 2
Switching hysteresis for the switching condition of preselection 2 (→ 9.12 Preselection 1 Menu)
PULSE TIME 2 (S)
Duration of the fleeting pulse for the switching condition of preselection 2 (→ 9.12 Preselection 1 Menu)
OUTPUT TARGET 2
Assignment of an output for the switching condition of preselection 2 (→ 9.12 Preselection 1 Menu)
(except default value)
see Preselection 1 Menu
CTRL OUT 2 Assignment of the switching condition to Ctrl� Out 2
OUTPUT POLARITY 2
Switching status for the switching condition of preselection 2 (→ 9.12 Preselection 1 Menu)
OUTPUT LOCK 2
Latching for the switching condition of preselection 2 (→ 9.12 Preselection 1 Menu)