UK
Operating instructions AX460
21
0000
Access not locked
…
9999
Access after entering the PIN code 9999
PIN PARAMETER
This parameter defines the PIN code for the locked access for all parameters (emergency PIN: 6079)�
0000
Access not locked
…
9999
Parameter setting of the device is only possible after entering the PIN
code�
BACK UP MEMORY
NO
No backup in case of a power failure�
YES
In case of a power failure the device stores the actual value� Only for
totalizer�
FACTORY SETTINGS
NO
The factory settings are not loaded�
YES
The factory settings are loaded (default values highlighted in grey)�
9.3 IN 1 Properties
In this menu the parameters for output 1 are defined�
CONFIGURATION
This parameter defines the configuration of input 1�
-10 … +10 V
Voltage input -10 … 10 V
0 … 20 MA
Current input 0 … 20 mA
4 … 20 MA
Current input 4 … 20 mA
START VALUE
This parameter defines the display value for an input signal of 0 V, 0 mA or 4 mA� Signals between START
VALUE and END VALUE behave proportionally�
-99999
Lowest value
0
Default value
99999
Highest value
END VALUE
This parameter defines the display value for an input signal of 10 V or 20 mA� Signals between START
VALUE and END VALUE behave proportionally�
-99999
Lowest value
10000
Default value
99999
Highest value
