Operating instructions AX460
14
8 Operation / touch screen
8.1 Display for parameter setting
The individual parameter menus and their parameters are described in a separate
(→ 9 Parameter / menu overview)
Device parameter setting:
In order to be able to set device
parameters, the touch screen must be
pressed for 3 seconds�
Select menu:
The required parameter menu can
be selected via the arrow keys and
confirmed with OK�
To close the menu selection, press
[C]�
Select parameter:
The required parameter can be
selected via the arrow keys and
confirmed with OK�
To close the parameter selection,
press [C]�
Edit parameters:
When the parameter value is flashing,
it can be edited via the arrow keys
and stored with OK�
To close the editing mode, press [C]�
Parameter changes are only active
after quitting the menu selection�
