ANT515 ANT516
12
6 Electrical connection
The device must be connected by a qualified electrician.
Device of protection class III (PC III).
The electrical supply must only be made via PELV/SELV circuits.
u
Disconnect power before connecting the device.
6.1 Wiring
u
Connect the unit to a DTE10x evaluation unit via the M12 connector.
w
Voltage is supplied via the evaluation unit.
Pin assignment
Wiring
4
1
3
L+
1
3
4
L
DATA
Information on available sockets see:
Cables with the following characteristics are suitable for the connection:
Length
Ohmic resistance (feed + return line)
Effective cable capacity
< 20 m
max. 3 Ω
max. 3 nF
