AL4042
Remote I/O module 16 DI
28
ü
The detailed view of the device is active.
u
Select [devicetag] menu.
u
Enter the application identifier.
u
Write the changed values to the device.
w
The device can be identified by the selected application tag.
9.1.14 Firmware: Reading the firmware version
Available information:
Parameter
Description
Value range
Access
[version]
Firmware version
e.g. AL4x4x_fw_md_1.4.0.142
ro
1
1
read only
Requirements:
ü
The parameter setting software has been started.
ü
The detailed view of the device is active.
u
Select the [Firmware] menu.
w
The menu page displays the firmware version of the device.
9.1.15 Firmware: Resetting the device
Requirements:
ü
The parameter setting software has been started.
ü
The detailed view of the device is active.
u
Select the [Firmware] menu.
u
Click on [factoryreset].
w
The device is reset to factory settings.
w
All parameters are set to their default values.
9.1.16 Firmware: Restarting the device
Requirements:
ü
The parameter setting software has been started.
ü
The detailed view of the device is active.
u
Select the [Firmware] menu.
u
Click on [Reboot].
w
The device will be restarted.
w
All set parameter values will be retained.
