IO-Link Master with AS-Interface Interface StandardLine 4 Ports IP 65 / IP 66 / IP 67
7
2
Safety instructions
Content
General ..................................................................................................................................................... 7
28333
>
2.1
General
59299
•
The device described is a subcomponent for integration into a system. The system architect is
responsible for the safety of the system. The system architect undertakes to perform a risk
assessment and to create documentation in accordance with legal and normative requirements to
be provided to the operator and user of the system. This documentation must contain all
necessary information and safety instructions for the operator, the user and, if applicable, for any
service personnel authorised by the architect of the system.
•
Read this document before setting up the product and keep it during the entire service life.
•
The product must be suitable for the corresponding applications and environmental conditions
without any restrictions.
•
Only use the product for its intended purpose (
→
Functions and features
(
→
•
If the operating instructions or the technical data are not adhered to, personal injury and/or
damage to property may occur.
•
The manufacturer assumes no liability or warranty for any consequences caused by tampering
with the device or incorrect use by the operator.
•
Installation, electrical connection, set-up, programming, configuration, operation and maintenance
of the product must be carried out by personnel qualified and authorised for the respective activity.
•
Protect units and cables against damage.
