SmartPLC SafeLine with PROFIBUS slave interface
187
Configuration of the analogue channels in slots 5 ... 8
41614
Depending on the setting of the device-specific parameters [Analogue channels per input slave] and
[Analogue channels per output slave], the following analogue channels are transmitted per AS-i slave:
Parameter value
Description
4 channels
Variable slave assignment
The analogue channels of max. 30 slave addresses are transmitted:
of single slaves: channels 1...4
or:
of A slaves: channels 1+2 and
of B slaves: channels 1+2
The device-specific parameters of the device allow you to individually define the order of 15 of the
analogue slaves to be transferred, respectively. All available slave addresses of both AS-i masters can be
selected (
→
Table: Variable slave assignment for slots 5 ... 8
(
→ S.
Preset, variable:
- for slots 5...8 respectively: 15 slaves on AS-i master 1
2 channels
Fixed slave assignment
The following analogue channels of each transferring AS-i single and A address are transmitted:
of single slaves: channels 1+2
or:
of A slaves: channels 1+2
The slave assignment is fixed (
→
Table: Fixed slave assignment for slots 5...8
(
→ S.
)). A configuration of
the slave order in the device-specific parameters is ineffective.
1 channel
Fixed slave assignment
Channel 1 of each AS-i single and A address is transferred:
of single slaves: channel 1
or:
of A slaves: channel 1
The slave assignment is fixed (
→
Table: Fixed slave assignment for slots 5...8
(
→ S.
)). A configuration of
the slave order in the device-specific parameters is ineffective.
1 channel A/B-
Slave
Fixed slave assignment
The following analogue channels of each transferring slave address are transmitted:
of single slaves: channels 1+3
or:
of A slaves: channel 1 and
of B slaves: channel 1
The slave assignment is fixed (
→
Table: Fixed slave assignment for slots 5...8
(
→ S.
)). A configuration of
the slave order in the device-specific parameters is ineffective.
