IFM AC412S, Руководство по эксплуатации устройства

Страница: 128 / 242

SmartPLC SafeLine with PROFIBUS slave interface
128
Display the switching states of the local outputs
42233
To display the switching states of the local outputs:
1 Select menu page
►
>
► Select [Local outputs] tab.
2 Display the switching states of the local outputs
> Menu page shows the following information:
Legend:
Switching states of the logical devices of the local
outputs
(→
Switching states of the logical devices: Colour
codes + symbols (→ S. 129 ))
Switching states of the local outputs
(→
Switching states of the local outputs: Colour
codes + symbols (→ S. 129 ))
Text field with status information of the marked output
The switching states of the local outputs are only displayed if the safe application is in the
RUN mode.
The switching states may be displayed although no safe configuration is stored on the device
(
→
Display status information of the fail-safe PLC
(
→ S.
131 )).
The displayed data is invalid in this case.
►
Select the required symbol with [  ] / [  ].