AS-i Gateway with Profinet device interface
25
>
Overview of slave states
41728
>
The slave selector shows an overview of the slaves in the
selected AS-i network.
>
The symbol colour signals the slave status. Meaning of
symbols and colours:
→
Slave status: colour code + symbols
(
>
The text field displays the status of the selected AS-i slave.
Possible status messages:
Slave active
Not projected
(= configuration error)
Double address
(= double address error)
Periphery
(= periphery fault)
Use:
1 Select an AS-i slave
►
Use the arrow keys [
], [
], [
] and [
] to select the desired AS-i slave.
>
The focus (= orange frame) is on the selected AS-i slave.
>
The info bar shows the address of the selected AS-i slave.
>
The text field shows a status message about the selected AS-i slave.
2 Activate the selected AS-i slave
►
Use [Select] function key to activate the selected AS-i slave and go to the next menu page.
OR:
Use [Back] function key to cancel and leave the slave selector.
